Wind spinners are a nice decoration for gardens or any other territory, where they are placed: colorful blades of the wind spinner are spinning round and round, mesmerizing the viewer. But one thing that may make you confused is that the wind spinner is not spinning even with enough wind. Now let us look at some of the frequent causes together with their recommendations to help your wind spinner turn once more.
1. Inspect for Obstructions
One important thing that must be done first is to observe if anything is blocking your wind spinner. In this way, trees, buildings, or any other structure can hinder the wind from getting to the spinner and therefore spinning.
Solution: In this case, you should try shifting your wind spinner to a larger field where it gets full exposure to the wind.
2. Check the Wind Direction
Wind spinners are created in specific designs to signify and capture wind from specific directions only. Sometimes a spinner working as a spinner won’t spin at all even if the wind is blowing; this is due to the direction of the wind that is not in harmony with your spinner.
Cyan Oasis' wind spinner, whether they are three-dimensional or double-sided, can be rotated 360° to better capture the wind from different directions.
Solution: Tilt the direction of your wind spinner to a position where its blades or vanes are parallel to the direction of the wind. Or choose the wind spinner that can spin at 360 degrees.
3. Examine the Axle and Bearings
Eventually, the axle or bearings of your wind spinner could become loose, rusty, or clogged with debris which makes the spinner difficult to turn. Maybe it is time to examine the Axle and Bearings as a way of preventing the occurrence of similar incidences in the future.
Solution: Before fitting, ensure that you clean the axle and bearings to eliminate any debris. If they are rusted, you might have to lubricate or in the most unfortunate circumstances replace the rusted parts.
4. Look for Damaged or Bent Vanes
There might be cases where the blades or vanes of your wind spinner may be bent or damaged in some way which hamper the efficiency of the spinner by not being able to rotate in the correct manner while catching wind.
Solution: Although these vanes are usually made of galvanized metal which is highly resistant to rust, the frequent opening of the drum may cause some of the vanes to bend or wear out and should therefore be straightened or replaced as the case may be. Check whether all parts are complete and of the best quality.
5. Consider the Wind Speed
Usually, wind spinners need some amount of wind to spin. If it is not windy your spinner may not even spin. Wind spinners of different crafts capture the wind differently, and Cyan Oasis' windmill spins well even at low wind speeds. Compared to a three-dimensional windmill, a double-sided windmill will spin faster at the same wind speed.
Solution: Wait for a day little more wind or get a wind spinner which is effective in low wind speeds. If you like to watch the art of telling rotations, you can choose the double-sided windmill. For gardening enthusiasts who prefer to enjoy the elegance of the wind, you can choose the three-dimensional wind spinner.
6. Evaluate the Balance
This means a balanced wind spinner will spin than an imbalanced one since a spin’s force will stay until the force from the wind counteracts it. The spinner may not spin as expected if the weight is distributed unevenly along the axis of rotation.
Solution: See the status of your spinner. It may be necessary to shift some weight around or even use entirely new components for the design to be balanced out.
7. Age and Wear
It could be old, in which case what you are experiencing must have been the cause it has been destroyed by nature. Parts may also degrade with time meaning the spinner will not be as efficient as before.
Solution: If your wind spinner is old, worn out, or damaged, perhaps it is high time that you get a new one. You can also find specialized wind spinner brands, such as Cyan Oasis, and inquire about the availability of adapted parts for replacement. Get that aging wind spinner spinning again.
8. Quality of the Spinner
Wind spinners are as different as the craft. Some are designed and manufactured with better quality material and style fully knowing that the only way the spins will work is to have wind blow over them while others are manufactured shoddily.
Solution: If you have noticed that the wind spinner seldom rotates, then it might be about time that you bought a better quality wind spinner.
9. Maintenance and Care
Maintenance can be a great way of ensuring that your wind spinner remains functional all the time to enable it to deliver the expected results. In the long run, if you fail to service your spinner, you may realize that it takes more time when problems are identified.
Solution: Develop the habit of analyzing and washing your wind spinner frequently. Use lubricants as required; use spare parts in case the existing ones develop problems over time.
10. Consult the Manufacturer
If you can't determine what the problem is on your own, you have the option of consulting the merchant. A professional manufacturer can quickly help you determine the problem and provide a convenient solution.
Solution: Get hold of the customer service of the brand of your wind spinner. They can advise on the ways to sort out a problem or offer some spare parts if they are needed. Cyan Oasis has a wealth of experience in the windmill manufacturing sector, providing quality service and expert advice. Giving a 1-year warranty on every order. If you have any problems with your Cyan Oasis purchase, feel free to contact the brand.
Conclusion
All in all, it can be said that the wind spinners are a piece of beauty that convey a feeling of serenity for the outdoors but it is something that does need a little maintenance and certain conditions to be optimal. By following the above procedures, you will be able to sort out most of the problems associated with your wind spinner and make sure that it spins with the wind and also beautify your compound. Therefore, if one finds his or her wind spinner unmoving, the above guide can help move it again. Happy spinning!
